Latest posts
SURGE PRO NEWS
22 Sept, 16:02
#Mac #BetaVersion 6.10.0-12360### Improvements - A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted. - Add a workaround for a system bug in macOS 27.2 beta to prevent Dashboard from crashing. - Improved UDP test diagnostics for peer-to-peer Tailscale and WireGuard policies without Internet egress, reportingSURGE PRO NEWS
22 Sept, 15:17
#iOS #TestFlightSurge 5 5.102.0 (3851) is ready to test on iOS.What to Test- Inline rule sets with the same name now merge across the main profile and modules instead of replacing one another, preserving rules contributed by each source.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
21 Sept, 15:03
#Mac #BetaVersion 6.10.0-12350### Improvements - A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted. - Add a workaround for a system bug in macOS 27.2 beta to prevent Dashboard from crashing. - Improved UDP test diagnostics for peer-to-peer Tailscale and WireGuard policies without Internet egress, reportingSURGE PRO NEWS
21 Sept, 14:57
#iOS #TestFlightSurge 5 5.102.0 (3850) is ready to test on iOS.What to Test- Made global adjustments to the UI layout logic and optimized details for iPhone Duo support. - Fixed horizontal scrolling in the iOS policy group category selector when categories exceed the available width. - Improved UDP test diagnostics for peer-to-peer Tailscale and WireGuard policies without Internet egress, reporting unsupported tests instead of waiting for a timeout. - Fixed logical rules incorrectly parsing policy names containing parentheses.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
18 Sept, 15:31
#Mac #BetaVersion 6.10.0-12330### Improvements - A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted. - Add a workaround for a system bug in macOS 27.2 beta to prevent Dashboard from crashing.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
18 Sept, 14:49
#iOS #TestFlightSurge 5 5.102.0 (3848) is ready to test on iOS.What to Test- Performance and memory usage optimizations - Optimized the Add Rule page. Domain rules can now also be added for SNI sniffing requests, and rule-specific additional configurations can be selected directly.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
17 Sept, 14:48
#Mac #BetaVersion 6.10.0-12320### Improvements - A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted. - Add a workaround for a system bug in macOS 27.2 beta to prevent Dashboard from crashing.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
15 Sept, 03:44
#Mac #BetaVersion 6.10.0-12300### Improvements - A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
14 Sept, 14:55
#iOS #TestFlightSurge 5 5.102.0 (3842) is ready to test on iOS.What to Test- A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
14 Sept, 14:53
forwarded from @surgetestflightfeed
Beta Updates- A category parameter has been added to policy groups for grouped display. It can be used when there are many policy groups. - All test-url parameters now support configuring HTTPS URLs for testing. The test result remains the latency of a single HTTP RTT, but due to the TLS handshake, the test duration may increase significantly when there are many policies. - In the previous version, MITM security was strengthened by generating a separate key pair for each distinct domain name. This caused noticeable delays when performing MITM concurrently on a large number of different domains. After evaluation, this change has been reverted.SURGE PRO NEWS
14 Sept, 14:23
forwarded from @surgetestflightfeed
Surge Mac 6.9.1 & Surge iOS 5.22.1 are now available.New Features - [iOS] Policy group widgets now support the extra-large size on iOS 27. - [iOS] Added a medium-sized iOS widget with start/stop controls, running status, and one-tap switching between Rule-Based Proxy, Direct Outbound, and Global Proxy. - Added UNKNOWN support to GEOIP and IP-ASN rules, allowing IP addresses without matching country or ASN database entries to be matched. This works in both individual rules and rule sets.Fixes and Improvements - Fixed lower-than-expected results under extreme throughput performance testing. - Fixed failed cellular backup connections in Wi-Fi Assist or Hybrid mode prematurely aborting an ongoing Wi-Fi connection attempt. - Fixed Pre-Matching remaining enabled after changing a rule to a non-reject policy or unsupported rule type. - Fixed Hysteria UDP forwarding with servers where HTTP/3SURGE PRO NEWS
14 Sept, 14:14
#Mac #ReleaseVersion 6.9.1-12290### Improvements - The macOS logical rule editor now supports Pre-Matching for AND, OR, and NOT rules using a reject policy, and identifies unsupported sub-rules before saving. - Added UNKNOWN support to GEOIP and IP-ASN rules, allowing you to match destination IP addresses with no corresponding country or ASN database entry. Supported in both individual rules and rule sets.### Fixes - Fixed missing traffic statistics for UDP connections through proxies and tunnels, including WireGuard and Tailscale. - Fixed a rare issue where a UDP proxy connection closing during packet reception could stall other traffic handled by Surge. - Fixed dark menu text becoming unreadable on macOS 26 and improved menu bar icon colors when the system appearance changes. - Fixed unnecessary Surge Helper installation or upgrade alerts at startup when the enabled features doSURGE PRO NEWS
14 Sept, 00:44
#iOS #AppStoreVersion: 5.22.1 Release Date: 2026-09-14New Features - Policy group widgets now support the extra-large size on iOS 27. - Added a medium-sized iOS widget with start/stop controls, running status, and one-tap switching between Rule-Based Proxy, Direct Outbound, and Global Proxy. - Added UNKNOWN support to GEOIP and IP-ASN rules, allowing IP addresses without matching country or ASN database entries to be matched. This works in both individual rules and rule sets.Fixes and Improvements - Fixed lower-than-expected results under extreme throughput performance testing. - Fixed failed cellular backup connections in Wi-Fi Assist or Hybrid mode prematurely aborting an ongoing Wi-Fi connection attempt. - Fixed Pre-Matching remaining enabled after changing a rule to a non-reject policy or unsupported rule type. - Fixed Hysteria UDP forwarding with servers where HTTP/3 DatagramSURGE PRO NEWS
10 Sept, 15:21
#iOS #TestFlightSurge 5 5.102.0 (3837) is ready to test on iOS.What to Test5.22.1 Release Candidate 2- Compiled with the iOS 27 SDK - Policy group Widgets support the extra-large size on iOS 27Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
9 Sept, 15:54
#iOS #TestFlightSurge 5 5.102.0 (3836) is ready to test on iOS.What to Test5.22.1 Release Candidate 1- Added UNKNOWN support to GEOIP and IP-ASN rules, allowing you to match destination IP addresses with no corresponding country or ASN database entry. Supported in both individual rules and rule sets. - Fixed a bug that caused results to fall short of expectations under extreme upload throughput performance testing. - Fixed an issue where a failed cellular backup connection in Wi-Fi Assist or Hybrid mode could prematurely abort an ongoing Wi-Fi connection attempt, including connections to local network destinations. - Fixed Pre-Matching remaining enabled after switching a rule to a non-reject policy or an unsupported rule type in the iOS and macOS rule editors.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
9 Sept, 15:40
#Mac #BetaVersion 6.9.1-12290### Improvements - The macOS logical rule editor now supports Pre-Matching for AND, OR, and NOT rules using a reject policy, and identifies unsupported sub-rules before saving.### Fixes - Fixed missing traffic statistics for UDP connections through proxies and tunnels, including WireGuard and Tailscale. - Fixed a rare issue where a UDP proxy connection closing during packet reception could stall other traffic handled by Surge. - Fixed dark menu text becoming unreadable on macOS 26 and improved menu bar icon colors when the system appearance changes. - Fixed unnecessary Surge Helper installation or upgrade alerts at startup when the enabled features do not require the helper. - Fixed Hysteria UDP traffic failing with servers where HTTP/3 Datagram negotiation interfered with UDP forwarding. - Fixed macOS Smart policy group context menus showing outdatedSURGE PRO NEWS
8 Sept, 17:02
#Mac #BetaVersion 6.9.1-12280### Improvements - The macOS logical rule editor now supports Pre-Matching for AND, OR, and NOT rules using a reject policy, and identifies unsupported sub-rules before saving.### Fixes - Fixed missing traffic statistics for UDP connections through proxies and tunnels, including WireGuard and Tailscale. - Fixed a rare issue where a UDP proxy connection closing during packet reception could stall other traffic handled by Surge. - Fixed dark menu text becoming unreadable on macOS 26 and improved menu bar icon colors when the system appearance changes. - Fixed unnecessary Surge Helper installation or upgrade alerts at startup when the enabled features do not require the helper. - Fixed Hysteria UDP traffic failing with servers where HTTP/3 Datagram negotiation interfered with UDP forwarding. - Fixed macOS Smart policy group context menus showing outdatedSURGE PRO NEWS
8 Sept, 16:33
#iOS #TestFlightSurge 5 5.102.0 (3835) is ready to test on iOS.What to Test- Added a medium-sized iOS widget that combines start/stop controls, running status, and one-tap switching between Rule-Based Proxy, Direct Outbound, and Global Proxy. - Fixed Hysteria UDP traffic failing with servers where HTTP/3 Datagram negotiation interfered with UDP forwarding. - Fixed SF Symbol policy group icons on iOS not adapting correctly to appearance changes. - Fixed a bug that caused results to fall short of expectations under extreme throughput performance testing.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
7 Sept, 16:17
#Mac #BetaVersion 6.9.1-12270### Fixes - Fixed missing traffic statistics for UDP connections through proxies and tunnels, including WireGuard and Tailscale. - Fixed a rare issue where a UDP proxy connection closing during packet reception could stall other traffic handled by Surge. - Fixed dark menu text becoming unreadable on macOS 26 and improved menu bar icon colors when the system appearance changes. - Fixed unnecessary Surge Helper installation or upgrade alerts at startup when the enabled features do not require the helper.Official Channel: @SurgeTestFlightFeedSURGE PRO NEWS
5 Sept, 15:56
#iOS #TestFlightSurge 5 5.102.0 (3833) is ready to test on iOS.What to Test- Fixed missing traffic statistics for UDP connections through proxies and tunnels, including WireGuard and Tailscale. - Fixed a rare issue where a UDP proxy connection closing during packet reception could stall other traffic handled by Surge. - Improved resource updates on iOS: pending automatic updates resume when the app becomes active, duplicate downloads are avoided, and outdated errors clear after a successful background refresh.Official Channel: @SurgeTestFlightFeed
Related Channels
Other channels in the same section of the catalogue.
